Brackets
Horserail has developed a series of Brackets that give the fence installation a clean, neat appearance. They are designed to provide optimum holding power while at the same time causing minimal friction when the fence expands and contracts during various weather conditions. All Brackets are "double coated" - hot dipped galvanized and powder coated. They are available in 4", 5" and 6" in black, brown and white.

Flat Bracket: This is the standard method of attaching the rail to the post line. Use four 2" 8-gauge non-rusting screws (not deck screws), one in each hole.

Top Bracket (Optional): This Bracket positions the rail flush with the top of the post. Use four 2" 8-gauge non-rusting screws (not deck screws), one in each hole.

Inside Corner Bracket: This unique curved edge ribbed Bracket can handle up to a 20 degree directional change with minimal friction to the rail. This allows the installer to place the rail on the inside of a corner post, giving a lot of safety to both horse and rider in riding arenas. Use four 2" 8-gauge non-rusting screws (not deck screws), one in each hole.

Inside 90 degree Bracket: Use this heavy duty, uniquely designed bracket for when you want to make a 90 degree turn. The corner post can safely stay outside and away from the horse and riders. Use two 3/8" lag screws to fasten it to the post. Lag Screw Length Determined by Post Density
- Dense Southern Yellow Pine - 3" Long
- Softer Red and White Pine - 3 1/2" Long
- Cedar/Lodge Pole, Ponderosa - 4" Long